• Steel construction welded body
• 3 roller balls are driven by hydromotor and planetary reducers (Each ball is driven by 3 separate planetary reducers)
• Hardened rolls
• Hardened and ground products made of special high strength material
• Movable control panel separate from the body
• Horizontal working position only
• Double speed working system
• 10” Screen
• 3-way hydraulic side supports
• Side shafts move up and down hydraulically
• Automation with NC control
• Rolls for all types of pipes and special profiles
• HEB, IPN, UPN crimping and pulling devices
Engine Power (kw) | 37-R |
---|---|
Roll Rolls (Ø mm) | 740 |
Shaft/Shaft (Ø mm) | 300 |
Working Speed (m/min) | 2-4 |
Makine Sizei G X U X Y / W X L X H (mm) | 4300x4850x3600 |
Weight (kg) | 33000 |
BENDING CAPACITIES | ||||
NO | Profile Type | 305 | Note | |
Size | Min Dia. | |||
1 | 250 X 100 | 3000 | Standard Rolls | |
2 | 500 X 100 | 2500 | Standard Rolls | |
3 | 180 X 180 | 2500 | Standard Rolls | |
4 | Ø 200 | 5000 | Optional Rolls | |
5 | Ø 350 X 6 | 10000 | Optional Rolls | |
6 | Ø 12 X 14,27 | 8000 | Optional Rolls | |
7 | 400 X 200 X 10 | 10000 | Optional Rolls | |
8 | 260 X 14 | 8000 | Optional Rolls | |
9 | 200 X 200 X 28 | 5000 | Optional Rolls | |
10 | 200 X 200 X 20 | 6000 | Optional Rolls | |
11 | 240 X 28 | 3000 | Standard Rolls | |
12 | 220 X 22 | 4000 | Standard Rolls | |
13 | 200 X 20 | 6000 | Optional Rolls | |
14 | U P N 550 | 3500 | Standard Rolls | |
15 | U P N 550 | 4000 | Standard Rolls | |
16 | I P N 550 | 4000 | Optional Rolls | |
17 | HEB 500 | 5000 | Optional Rolls | |
18 | U P N 340 | 16000 | Optional Rolls | |
19 | I P N 360 | 11000 | Optional Rolls | |
20 | HEB 280 | 11000 | Optional Rolls |
# Special washer may be required / ## Special tool required
Capacities are given according to 260 N/mm² sheet yield strength. / Technical information may be changed without prior notice.