• 2 roller balls were driven by the gear system from the reducer.
• Steel construction body
• Upper shaft moves idle
• Roller balls are hardened
• Roller shafts are hardened and ground from special steel
• Standard 1 set of roller balls
• Adjustable side supports
• Horizontal and vertical working
• Mobile control panel
• Compliance with CE standards
• Special rolls for Pipe and Profile
• Double speed
• Angle bending rolls
• Special side supports for angle iron
• Precise bending with braked motor
| Engine Power (kw) | 0.75 |
|---|---|
| Roll Rolls (Ø mm) | 153 |
| Shaft/Shaft (Ø mm) | 50 |
| Operating Speed (m/min) | 4.5 |
| Machine Size W X L | |
| Weight (kg) | 380 |
| BENDING CAPACITIES | |||||
| NO | Profile Type | OPK 42 | Note | ||
| Size | Min Dia. | ||||
| 1 |
 |
6 0 x 1 0 4 0 x 1 0 |
1000 500 |
Standard Rolls | |
| 2 |
 |
80 x 10 6 0 x 1 0 |
500 500 |
Standard Rolls | |
| 3 |
 |
25 x 25 2 0 x 2 0 |
500 300 |
Standard Rolls | |
| 4 |
 |
Ø30 Ø20 |
1000 350 |
Optional Rolls | |
| 5 |
 |
Ø48 x 2 Ø30 x 2 |
900 300 |
Optional Rolls | |
| 6 |
 |
1 1/2 ” x 2 , 9 1 ” x 2 , 3 |
900 4 0 0 |
Optional Rolls | |
| 7 |
 |
6 0 x 4 0 x 2 5 0 x 3 0 x 2 |
2500 1000 |
Optional Rolls | |
| 8 |
 |
40 x 3 20 x 2 |
1500 450 |
Optional Rolls | |
| 9 |
 |
5 0 x 5 0 x 5 4 0 x 4 0 x 5 |
1300 750 |
Optional Rolls | |
| 10 |
 |
5 0 x 5 0 x 5 4 0 x 4 0 x 6 |
1400 850 |
Optional Rolls | |
| 11 |
 |
40x3.5 25x3 |
400 250 |
Standard Rolls | |
| 12 |
 |
40x3.5 25x3 |
7 0 0 5 0 0 |
Standard Rolls | |
| 13 |
 |
40x3.5 25x3 |
400 400 |
Standard Rolls | |
| 14 |
 |
UPN 65 UPN 40 |
2500 1300 |
Optional Rolls | |
| 15 |
 |
UPN 65 UPN 40 |
2700 1500 |
Standard Rolls | |
# Special washer may be required / ## Special tool required
Capacities are given according to 260 N/mm² sheet yield strength. / Technical information may be changed without prior notice.
